TM-9-2320-209-20-3-4

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4

MAY 1981

TM-9-2320-209-20-3-4 - Page 139 of 410

TM 9-2320-209-20-3-4

FRAME 4

1.

Put rod (1) with clevis (2) in place under truck.

2.

Using 3/4-inch wrench, loosen nut (3). Turn clevis (2) until holes aline with

holes in lever (4).

Tighten nut (3).

3.

Put clevis pin (5) through holes in clevis (2) and lever (4).

4.

Put cotter pin (6) through hole in clevis pin (5) and using pliers, bend open

ends of cotter pin.

END OF TASK

19-126