TM-9-2320-209-20-3-4

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4

MAY 1981

TM-9-2320-209-20-3-4 - Page 125 of 410

TM 9-2320-209-20-3-4

FRAME 2

1.

2.

3.

4.

Aline splines on driveshaft (1) with splines in universal joint yoke (2). Put

propeller shaft into universal joint yoke.

Working at hydraulic hoist pump (3), aline keyway in universal joint yoke (4)

with woodruff key on hydraulic hoist pump shaft (5).

Push universal joint yoke (4) on hydraulic hoist pump shaft (5). Using ruler,

leave 1/2 inch space between universal joint yoke and hydraulic hoist pump

(3).

Using 3/8-inch wrench, screw in and tighten setscrew (6).

NOTE

Follow-on Maintenance Action Required:

If universal joints were replaced, lubricate universal

joints.

Refer to LO 9-2320-209-12/1.

END OF TASK

19-112