TM 9-2320-209-20-3-4
a.
Removal.
FRAME 1
Soldier A
Soldier B
Soldier A
Soldier B
Soldier A
Soldier B
Soldier A
1.
2.
3.
4.
5.
6.
7.
8.
Using allen wrench, loosen two setscrews (1).
Hold pump (2) so it will not fall when soldier A works on it.
Using wrenches, unscrew and take out four screws (3) and nuts
(4).
Hold universal joint (5).
Pull pump (2) out of universal joint (5).
Take universal joint (5) off shaft (6). Using ballpeen hammer and
brass drift, tap out two keys (7).
Put pump (2) back in place, alining hole for one screw (3).
Using wrenches, screw in and tighten one screw (3) and nut (4) to
hold pump (2).
GO TO FRAME 2
19-103