TM-9-2320-209-20-3-4

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4

MAY 1981

  TM-9-2320-209-20-3-4 - Page 114 of 410

TM 9-2320-209-20-3-4
19-19. CABLE LEVEL WINDER DRIVE CHAINS REPAIR (TRUCK M764).
TOOLS:
Grinder
SUPPLIES:
Chain connecting link assembly
PERSONNEL: One
EQUIPMENT CONDITION:
Truck parked, engine off, handbrake set.
a. Preliminary Procedure.
Remove drive chain to be repaired. Refer to
para 19-15.
b.
Repair.
FRAME 1
WARNING
Eye shields must be worn when using grinder. Eye
injury can occur if eye shields are not used.
1.
Using grinder, grind off riveted ends of link pins (1) on any link found to
be damaged.
Take off keeper (2) and link (3).
2.
Put connecting link (4) through both ends of chain (5).
3.
Put on keeper (6) and clip (7).
NOTE
Follow-on Maintenance Action Required:
Replace drive chain. Refer to para 19-15.
END OF TASK
19-101


Back to Top