TM-9-2320-209-20-3-4

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4

MAY 1981

TM-9-2320-209-20-3-4 - Page 112 of 410

TM 9-2320-209-20-3-4

FRAME 2

1.

Using 3/4-inch wrench, loosen locknut (1) on adjusting screw (2).

2.

Hold straight edge along chain (3) as shown.

Place 6-inch ruler at midpoint

of chain (3) as shown. Push in bottom of chain and check that there is 1/2-

inch of slack in chain.

3.

If there is more than 1/2 inch of slack, tighten adjusting nut (4). If there

is less than 1/2 inch of slack, loosen adjusting nut.

4.

When there is 1/2 inch of slack, using 3/4-inch wrench, tighten locknut (1).

GO TO FRAME 3

19-99