TM 9-2320-209-20-3-4
FRAME 3
Soldier A
1.
Soldier B
2.
Soldier A
3.
4.
Soldier B
5.
Soldier A
6.
7.
END OF TASK
Using ballpeen hammer and brass drift, tap key (1) in place.
Put universal joint (2) onto shaft (3). Using allen wrench, tighten
setscrew (4).
Hold pump (5) so it will not fall down when soldier A works on it.
Using wrenches, unscrew and take out screw (6) and nut (7).
Using ballpeen hammer and brass drift, tap in key (8).
Put shaft of pump (5) into universal joint (2). Aline holes
for four screws (6).
Using wrenches, screw in and tighten four screws (6) and nuts
(7).
Using allen wrench, tighten setscrew (9).
19-107