TM-9-2320-209-20-3-4

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4

MAY 1981

TM-9-2320-209-20-3-4 - Page 109 of 410

TM 9-2320-209-20-3-4

FRAME 2

1.

2.

3.

4.

Using 3/4-inch wrench, loosen locknut (1) on adjusting screw (2).

Hold straight edge along top of chain (3) as shown. Hold 6-inch ruler at

midpoint of chain (3). Push down on top of chain and check that there is

1/2 inch of slack.

If there is less than 1/2 inch of slack, using 1/2-inch wrench, loosen adjust-

ing screw (2). If there is more than 1/2 inch of slack, tighten adjusting

screw.

When there is 1/2 inch of slack, using 1/2-inch wrench, hold adjusting screw

(2). Using 3/4-inch wrench, tighten locknut (1).

GO TO FRAME 3

19-96