TM-9-2320-209-20-3-4

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4

MAY 1981

TM-9-2320-209-20-3-4 - Page 160 of 410

TM 9-2320-209-20-3-4

CHAPTER 20

BUMPER GUARDS GROUP MAINTENANCE

Section I. SCOPE

20-1. EQUIPMENT ITEMS COVERED.

This chapter gives equipment maintenance

procedures for bumper brackets, guards, and protective devices for which there are

authorized corrective maintenance tasks at the organizational maintenance level.

20-2. EQUIPMENT ITEMS NOT COVERED .

All equipment items for which corrective

maintenance is authorized at the organizational maintenance level are covered in this

chapter.

Section II.

BUMPER BRACKETS , GUARDS, AND PROTECTIVE DEVICES

20-3. HEADLIGHT GUARD REMOVAL AND REPLACEMENT .

NOTE

This task is the same for the right and left head-

light guards, This task is shown for the left

headlight guard. On some trucks, the headlight

is on the bottom and on other trucks the head-

light is on the top.

This task is the same for both.

TOOLS : 9/16-inch wrench (2)

3/4-inch wrench (2)

SUPPLIES : None

PERSONNEL : One

EQUIPMENT CONDITION :

Truck parked, engine off, handbrake set.

20-1