TM-9-2320-209-20-3-4

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4

MAY 1981

TM-9-2320-209-20-3-4 - Page 346 of 410

TM 9-2320-209-20-3-4

FRAME 2

1.

2.

3.

4.

5.

6.

Put pressurization valve hand control assembly cable housing (1) in clamp

(2) and control cable (3) in two swivels (4).

Push swivels (4) all the way toward firewall (5).

Slide pressurization valve hand control assembly cable housing (1) in clamp

(2) so there is no less than 1/2 inch between swivels (4) and pressurization

valve hand control assembly cable housing (1).

Using wrenches, tighten capscrew and nut (6). Push swivels (4) all the

way away from firewall (5).

Using screwdriver, tighten two setscrews (7).

From inside cab, move pressurization valve hand control knob (8) out and

in several times to make sure all parts move smoothly without binding.

NOTE

Follow-on Maintenance Action Required:

Close hood. Refer to TM 9-2320-209-10.

END OF TASK

23-119