TM 9-2320-209-20-3-4
FRAME 3
1.
Put gearshift lever (1) over stub shaft (2).
2.
Put bolt (3) through split flange holes at bottom of gearshift lever (1).
3.
Using 5/8-inch and 11/16-inch wrenches, screw on and tighten locknut and
flat washer (4).
4.
Slide rubber boot (5) down over end of gearshift lever (1).
NOTE
Follow-on Maintenance Action Required:
Replace decontamination apparatus bracket assembly.
Refer to TM 3-4230-204-12&P.
END OF TASK
23-125