TM-9-2320-209-20-3-4

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4

MAY 1981

TM-9-2320-209-20-3-4 - Page 357 of 410

TM 9-2320-209-20-3-4

FRAME 2

Soldier A 1.

Soldiers 2.

A and B

Soldier C 3.

4.

Soldiers 5.

A and B

GO TO FRAME

Hook snatch block (1) on center of spreader tube on A-frame (2).

Lift up A-frame (2) until soldier C has enough slack to put end

loop of cable (3) on pintle hook (4) and hold A-frame in place.

When there is enough slack in cable (3), put eyebolt (5) over

loop end of cable. Open pintle hook (4) and put looped end of

cable around pintle hook as shown.

Put washer (6) and plate (7) on back of truck and aline screw

hole.

Put eyebolt (5) in place. Tell soldiers A and B when

finished.

Lower A-frame (2) to position shown.

3

23-130