TM-9-2320-209-20-3-4

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4

MAY 1981

TM-9-2320-209-20-3-4 - Page 347 of 410

TM 9-2320-209-20-3-4

Section IV. SPECIAL PURPOSE KITS

23-32. DECONTAMINATION APPARATUS MOUNTING BRACKET REMOVAL AND

REPLACEMENT.

TOOLS:

7/16-inch wrench

11/16-inch open end wrench

5/8-inch open end wrench

9/16-inch wrench (2)

SUPPLIES: None

PERSONNEL: One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a.

Preliminary Procedure. Remove decontamination apparatus bracket assembly.

Refer to TM 3-4230-204-12&P.

b. Removal.

FRAME 1

1.

Slide rubber boot (1) up gearshift lever (2) as shown.

2.

Using 11/16-inch and 5/8-inch wrenches, unscrew and take off nut with flat

washer (3) from bolt (4). Take out bolt and lift off gearshift lever (2).

GO TO FRAME 2

23-120