TM-9-2320-209-34-2-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 3

MAY 1981

TM-9-2320-209-34-2-1 - Page 433 of 770

frame 4

TM 9-2320-209-34-2-1

1.

Measure

2. Measure

3. Measure

4. Measure

NOTE

Readings must be within limits given in table 10-4. If

readings are not within given limits, throw away part

and get a new one.

tooth width of shaft splines (1).

diameter of outer shaft journal (2).

diameter of inner shaft journal (3).

outside diameter for bearing surface on universal joint (4).

END OF TASK

Index

Number

1

2

3

4

Table 10-4. Front Axle Shaft and Universal Joint Wear Limits

Size and Fit Wear

of New Parts Limits

Item/Point of Measurement (inches) (inches)

Shaft spline tooth width

0.1704 to 0.1750 0.1699

Outer shaft journal diameter 1.668 to 1.670 1.666

Inner shaft journal diameter 1.668 to 1.670 1.666

Universal joint bearing surface

1.1614 to 1.1618 None

10-34