TM-9-2320-209-34-2-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 3

MAY 1981

TM-9-2320-209-34-2-1 - Page 426 of 770

frame 1

TM 9-2320-209-34-2-1

10-5. FRONT AXLE SHAFT AND UNIVERSAL JOINT REPAIR.

TOOLS:

Oil Seal and retainer puller, pn 8708740

Oil seal replacer, pn 7083258

SUPPLIES: Solvent, dry

Clean rags

Artillery and

PERSONNEL: One

EQUIPMENT CONDITION:

cleaning, type II (SD-2), Fed. Spec P-D-680

automotive grease, type GAA, MIL-G-10924

Truck parked, engine off, handbrake set.

a. Preliminary Procedure. Remove front axle shaft assembly. Refer to

TM 9-2320-209-20.

b. Disassemble.

NOTE

If working on ball-type universal joint, do step 1. If

working on center cross-type universal joint, go to

frame 4.

1.

Drive universal joint grease pin (1) out of yoke (2) on outer shaft (3).

GO TO FRAME 2

10-27