TM-9-2320-209-34-2-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 3

MAY 1981

TM-9-2320-209-34-2-1 - Page 480 of 770

TM 9-2320-209-34-2-1

FRAME 13

1.

Using bearing preload tester, pn 3475922, (1), wrap cable (2) around helical

drive pinion (3).

2.

Pull tester (1) and note reading on scale. Reading for old bearings should

4 to 8 pound-inches. Reading for new bearings should be 12 to 18 pound-

inches.

IF READING IS NOT WITHIN LIMITS GIVEN, GO TO FRAME 14.

IF READING IS WITHIN LIMITS GIVEN, GO TO FRAME 15

be

10-81