TM-9-2320-209-34-2-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 3

MAY 1981

TM-9-2320-209-34-2-1 - Page 472 of 770

TM 9-2320-209-34-2-1

FRAME 5

1.

Using bearing preload tester, pn 7950157, (1), wrap cable (2) around through

shaft (3).

2.

Pull on tester (1) until shaft turns. If original bearings are used, reading

should be 4 to 8 pound-inches. If new bearings are used, reading should be

12 to 18 pound-inches.

3.

Take off tester (1).

IF READING IS NOT WITHIN LIMITS GIVEN, GO TO FRAME 6.

IF READING IS WITHIN LIMITS GIVEN, TAKE OUT THROUGH SHAFT (3) (REFER

TO PARA 1O-7c, FRAME 10), THEN GO TO FRAME 7

10-73