TM-9-2320-209-34-2-1
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 3
MAY 1981
TM-9-2320-209-34-2-1 - Page 505 of 770
TM 9-2320-209-34-2-1
h. Replacement of Bearing into Housing.
TOOLS:
No special tools required
SUPPLIES:
Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680
Anti-seize compound, white lead, Fed. Spec TT-A-680-B-2
PERSONEL: One
1.
2.
3.
4.
5.
6.
7.
WARNING
Dry cleaning solvent is flammable. Do not use
near an open flame. Keep a fire extinguisher
nearby when solvent is used. Use only in
well-ventilated places. Failure to do this may
result in injury to personnel and damage to
equipment.
Using solvent, clean bore of housing (1).
Coat bore of housing (1) with anti-seize compound.
Put housing (1) in place in arbor press (2).
Place bearing (3) squarely on bore of housing (1).
Put sleeve (4) on outer race (5) of bearing ( 3).
Put steel drive plate (6) on top of sleeve (4).
Push bearing (3) into housing (1).
END OF TASK
10-106
Back to Top
