TM-9-2320-209-34-2-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 3

MAY 1981

TM-9-2320-209-34-2-1 - Page 504 of 770

TM 9-2320-209-34-2-1

g.

Replacement of Bearing onto Shaft.

TOOLS : No special tools required

SUPPLIES : Solvent, dry cleaning, Type II (SD- 2), Fed. Spec P-D-680

Anti-seize compound, white lead, Fed. Spec TT-A-680-B-2

PERSONNEL: One

FRAME 1

WARNING

Dry cleaning solvent is flammable. Do not

use near an open flame. Keep a fire

extinguisher nearby when solvent is used.

Use only in well-ventilated places. Failure

to do this may result in injury to personnel

and damage to equipment.

1.

Coat bearing seat on shaft (1) with anti-seize compound.

2.

Hold shaft (1) in place in arbor press ( 2).

3.

Place bearing (3) squarely on top of shaft (1).

4.

Place sleeve (4) on inner race (5). Put steel drive plate (6) on

sleeve (4) .

5.

Press bearing (3) into place on shaft (1).

END OF TASK

10-105