TM-9-2320-209-34-2-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 3

MAY 1981

TM-9-2320-209-34-2-1 - Page 494 of 770

TM 9-2320-209-34-2-1

FRAME 27

1.

Tighten each adjusting nut (1) one notch.

2.

Put in two adjusting nut locks (2). If adjusting nuts (1) do not line up with

nut locks (2), loosen nuts (1) enough to aline them.

3.

Take out adjusting nut locks (2),

4.

Tighten four screws (3) to 300 pound-feet.

5.

Put two adjusting nut locks (2) in place.

6.

Put in two screws (4).

7.

Put safety wire (5) through four screws (3) and two screws (4) as shown.

GO TO FRAME 28

10-95