TM-9-2320-209-34-2-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 3

MAY 1981

TM-9-2320-209-34-2-1 - Page 491 of 770

TM 9-2320-209-34-2-1

1

0

Put two bearing caps (1) in place, alining alinement marks.

2.

Finger tighten four screws (2) and washers (3).

3.

Screw in two adjusting nuts (4) until they bind.

4.

Tighten screws (2) just enough to firmly hold two bearing cups (5).

5.

Using spanner wrench, tighten two adjusting nuts (4) a little at a time until

nuts are tight and screwed in the same distance.

GO TO FRAME 25

10-92