TM-9-2320-209-34-2-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 3

MAY 1981

TM-9-2320-209-34-2-1 - Page 492 of 770

TM 9-2320-209-34-2-1

1.

Turn helical drive gear (1) several times to seat bearings.

2.

Place dial indicator (2) on carrier flange (3) so plunger is against side face of

helical gear (1).

3.

Push and pull on helical drive gear (1) and check reading on dial indicator (2).

4.

Using spanner wrench, tighten two adjusting nuts (4) a little at a time. Do

step 3 again until dial indicator (2) reading is 0.000 inch.

5.

Turn helical drive gear (1) one full turn. Check that runout on dial

indicator (2) shows 0.008 inch or less.

GO TO FRAME 26

10-93