TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 252 of 899

TM 9-2320-209-34-2-2

d.

Inspection.

FRAME 1

1.

Put oil on two bearings (1). Turn bearing and look for roughness, pitting,

scoring, cracks or chipped areas.

2.

Check rotor (2) and two snaprings (3) for scoring, pitting or cracks.

NOTE

Rotor oil seal contact surface must have a uniform

high polish. Minor surface defects may be removed

by polishing with crocus cloth.

3.

Check rotor (2) for cracks or breakage at edge of vane slots (4).

GO TO FRAME 2

17-235