TM-9-2320-209-34-2-2
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3
MAY 1981
TM-9-2320-209-34-2-2 - Page 256 of 899
TM 9-2320-209-34-2-2
NOTE
Readings must be within limits given in table 17-2.
The letter L indicates a loose fit and the letter T
indicates a tight fit.
If readings are not within
given limits,
throw away part and get a new one.
1.
Measure liner inside diameter (1).
2.
Measure thickness of four vanes (2).
3.
Measure fit of four vanes (2) in four vane slots (3).
END OF TASK
Table 17-2. Vane and Liner Wear Limits and Fit
Index Number
Item /Point of Measurement
1
Liner inside diameter
2
Vane thickness
3
Fit of vanes in vane slots
Size and Fit
of New Parts Wear Limit
(inches) (inches)
5.000 to 5.0020 None
0.4900
to
0.4950
None
0.0060L to 0.0150L
None
17-239
Back to Top
