TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 263 of 899

TM 9-2320-209-34-2-2

1.

Put thin coat of gasket cement to part of head (1) next to casing (2).

Place casing on bench, outboard head (3) down.

2.

Push inboard head (1) down

of liner (5).

3.

Put in eight lockwashers (6)

If rotor

inboard

4.

Put in key (8) in

GO TO FRAME 6

rotor (4). Turn inboard head to seat pin hole

and screws (7).

NOTE

(4) binds, loosen screws (7) and tap

head (1) with hammer. Tighten screws.

end of rotor (4).

17-246