TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 255 of 899

TM 9-2320-209-34-2-2

FRAME 4

NOTE

Readings must be within limit given in table 17-1.

If readings are not within given limits, throw away

part and get a new one.

1.

Measure front diameter (1) and rear diameter (2) of rotor shaft.

2.

Measure width of four vane slots (3).

3.

Measure width of four vanes (4).

4.

Measure rotor width (5).

GO TO FRAME 5

Table 17-1. Rotor Shaft and Vane Wear Limits

Index Number

1

2

3

4

5

17-238

Item /Point of Measurement

Rotor shaft front diameter

Rotor shaft rear diameter

Vane slot width

Vane width

Rotor width

Size

and Fit

of New Parts Wear Limit

(inches) (inches)

1.1850 to 1.1860 1.1660

1.1850 to 1.1860 1.1660

0.5000

to

0.5050

None

1.2400 to 1.2600 1.0625

3.4970 to 3.4990 2.4950