TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 558 of 899

TM 9-2320-209-34-2-2

f.

Repair.

(1) Smooth out any chips, burrs or scratches with a honing stone.

(2) Weld any cracks or small holes. Refer to TM 9-237.

g.

Assembly.

NOTE

Shims (1) must be same thickness as noted.

1.

Put shims (1) on drive pinion shaft (2).

NOTE

When replacing ball bearing (3), bearing shield must

face drive pinion (4).

2.

Pack ball bearing (3) with grease. Put on ball bearing.

3.

Put on adjusting nut (5) and retaining ring (6).

GO TO FRAME 2

17-541