TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 563 of 899

TM 9-2320-209-34-2-2

NOTE

Shims (1 and 2) must be same thickness as noted.

1.

Put shims (1) in feed gear and hub assembly (3).

2.

Put shims (2) on feed gear and hub assembly shaft (4).

3.

Put ball bearing (5) in bearing retainer flange (6).

4.

Put bearing retainer flange (6) with ball bearing (5) on feed gear and hub

assembly (3).

5.

Using spanner wrench, put on adjusting nut (7).

6.

Put on retainer ring (8).

END OF TASK

17-546