TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 568 of 899

TM 9-2320-209-34-2-2

FRAME 2

1.

2.

3.

4.

5.

6.

7.

Working at front of clutch case (1), take out four capscrews (2) and

lockwashers (3).

Take off cover (4) and gasket (5).

If intermediate case first reduction drive gear (6) and drive clutch and brake

first reduction drive pinion (7) are alined as shown in view A, add one

shim (8).

If intermediate case first reduction drive gear (6) and drive clutch and brake

first reduction drive pinion (7) are alined as shown in view B, take off one

shim (8).

Put on gasket (5) and cover (4) and aline screw holes.

Put in four capscrews (2) and lockwashers (3).

Do frame 1 again.

GO TO FRAME 3

17-551