TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 562 of 899

FRAME 5

TM 9-2320-209-34-2-2

1.

Slide feed pinion shaft (1) part way into drive pinion shaft (2) as shown.

2.

Put two rubber bands (3) on feed pinion shaft (1) as shown.

3.

Coat 24 bearing rollers (4) with oil.

4.

Put 24 bearing rollers (4) under two rubber bands (3) on feed pinion shaft (1).

5.

Slide feed pinion shaft (1) into drive pinion shaft (2) until 24 bearing rollers

(4) are held in place by drive pinion (5).

6.

Take off two rubber bands (3).

GO TO FRAME 6

17-545