TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 571 of 899

TM 9-2320-209-34-2-2

(2) First reduction feed gear and hub assembly.

FRAME 1

1.

Working through shaft hole in power leveler mounting flange (1), check that

front edge of intermediate case first reduction feed gear and hub assembly (2)

is alined with front edge of drive clutch and brake first reduction feed pinion

(3) as shown.

If gears (2 and 3) are not alined, note the way gears are alined.

2.

IF GEARS ARE NOT ALINED, GO TO FRAME 2.

IF GEARS ARE ALINED, GO TO FRAME 3

17-554