TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 578 of 899

TM 9-2320-209-34-2-2

FRAME 4

1.

Remove and disassemble boring case gear assembly. Refer to para 17-46.

2.

If reading in step 4 of frame 3 is less than 0.011 inch, do the following:

a.

Add 0.011 inch thickness to lower rack carrier bearing shim set (1).

b. Take out 0.011 inch thickness from upper rack carrier bearing shim

set (2).

c.

Add 0.011 inch thickness to rack drive gear shim set (3).

3.

If reading in step 4 of frame 3 is more than 0.034 inch, do the following:

a. Take out 0.020 inch thickness from lower rack carrier bearing shim

set (1).

b. Add 0.020 inch thickness to upper rack carrier bearing shim set (2).

4.

Assemble and replace boring case gear assembly. Refer to para 17-46.

END OF TASK

17-561