TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 580 of 899

TM 9-2320-209-34-2-2

FRAME 2

1.

2.

3.

4.

5.

Remove and disassemble intermediate gear assembly. Refer to para 17-47b and

para 17-47c.

If intermediate case second reduction drive pinion (1) and boring case rack

drive gear (2) are alined as noted in frame 1 and shown in view A, add one

second reduction feed pinion bearing shim (3).

If intermediate case second reduction drive pinion (1) and boring case rack

drive gear (2) are alined as noted in frame 1 and shown in view B, take out

one second reduction feed pinion bearing shim (3).

Assemble and replace intermediate gear assembly. Refer to para 17-47g and

para 17-47h.

Do frame 1 again.

GO TO FRAME 3

17-563