TM-9-2320-209-34-2-2
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3
MAY 1981
TM-9-2320-209-34-2-2 - Page 579 of 899
TM 9-2320-209-34-2-2
(4) Drive pinion.
1.
Working through inspection hole (1), check that front edge of intermediate case
second reduction drive pinion (2) is alined with front edge of boring case rack
drive gear (3) as shown.
2.
If gears are not alined, note the way they are alined.
IF GEARS ARE NOT ALINED, GO TO FRAME 2.
IF GEARS ARE ALINED, GO TO FRAME 3
17-562
Back to Top
