TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 575 of 899

TM 9-2320-209-34-2-2

(3) Feed pinion.

1.

Take out eight machine bolts (1) and lockwashers (2).

2.

Take off inspection plate (3) and gasket (4).

3.

Working through inspection hole (5), check that front edge of intermediate case

second reduction feed pinion (6) is alined with front edge of boring case rack

feed idler gear (7) as shown.

4.

If gears (6 and 7) are not alined, note the way gears are alined.

IF GEARS ARE NOT ALINED, GO TO FRAME 2.

IF GEARS ARE ALINED, GO TO FRAME 3

17-558