TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981
TM-9-2320-209-34-2-2

  TM-9-2320-209-34-2-2 - Page 593 of 899

TM 9-2320-209-34-2-2
d.
Cleaning.
(1) Clean all bearings. Refer to Part 1, para 10-3.
(2) There are no special cleaning procedures needed for all other parts.
Refer to cleaning procedures given in Part 1, para 1-3.
e.
Inspection and Repair.
FRAME 1
1.
Check that main drive idler spur gear (1) and main drive spur gear (2) do
not have sharp fins or burrs at tooth corners.
2.
Check that tooth faces are not pitted or damagedin any other way. If gears
have chipped or broken teeth, throw them out and get new ones in their
places. Using honing stone, smooth nicks, scores or burrs.
GO TO FRAME 2
17-576


Back to Top