TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 590 of 899

TM 9-2320-209-34-2-2

1.

Take off eight screws (1) and lockwashers (2) from retainers (3 and 4).

2.

Tap threaded end of gear shaft assembly (5) with soft-faced hammer until

puller can be put on retainer (4).

3.

Pull off rear retainer (4) and gasket (6). Throw away gasket.

4.

Tap unthreaded end of gear shaft assembly (5) to loosen front retainer (3).

5.

Pull off front retainer (3), gear shaft assembly (5), and gasket (7) from main

drive idler gear housing (8).

6.

Pull off retainer (3) and gasket (7) from gear shaft assembly (5) and throw

away gasket.

NOTE

When pulling off retainer (3), bearing may also come

off shaft with retainer.

GO TO FRAME 5

17-573