TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 594 of 899

TM 9-2320-209-34-2-2

FRAME 2

1.

Check that main drive gear shaft (1), idler gear shaft (2), and idler gear

bearing spacer (3) do not have cracks and that shafts are not bent or warped.

Take off raised metal, nicks or scratches with a honing stone and polish

machined surfaces with crocus cloth. If more repair is needed, throw out

parts and get new ones in their places.

2.

Check that two sleeves (4) are not damaged. Cut off damaged sleeves and

press on new ones.

GO TO FRAME 3

17-577