TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 634 of 899

TM 9-2320-209-34-2-2

d. Cleaning.

There are no special cleaning procedures needed. Refer to

cleaning procedures given in Part 1, para 1-3.

NOTE

Clean all parts before inspection and before

assembly.

Inspection and Repair.

1.

Measure

2.

Measure

3.

Measure

4.

Measure

NOTE

Readings must be within limits given in table 17-5.

If readings are not within given limits, throw away

part and get a new one.

fit of adjusting bearing (1)

length of adjusting bearing

fit of sleeve bearing (3) on

of worm gear shaft (2).

(1).

shaft (2).

thickness of thrust washer (4).

GO TO FRAME 2

Table 17-5. Leveling Worm gear Assemblies Wear Limits

Index

Number

1 and 2

1

3 and 2

4

Item /Point of Measurement

Fit of bearing on shaft

Adjusting bearing length

Fit of sleeve bearing on shaft

Thrust washer thickness

Size and Fit

of New Parts

Wear Limit

(inches)

(inches)

0.004

to

0.007

None

2.875 2.845

0.004

to

0.007

None

0.406

0.374

17-617