TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 642 of 899

TM 9-2320-209-34-2-2

FRAME 4

1.

From inside of worm gear housing (1), loosely put in worm adjusting bearing (2).

2.

Place leveling worm gear (3) and thrust washer (4) in housing (1).

NOTE

Leveling worm gear (3) must be between adjusting bearing

(1) and thrust washer (4). Setscrew slot in thrust washer

(4) must face away from worm gear.

3. Put key (5) in shaft (6).

4.

Aline keyway in worm gear (3) and thrust washer (4) with key (5) in shaft (6).

Tap shaft through thrust washer end of housing (2) until square end of shaft sticks

out as far as noted.

GO TO FRAME 5

17-625