TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 772 of 899

TM 9-2320-209-34-2-2

17-64. PIPELINE CONSTRUCTION TRUCK BODY REMOVAL, REPAIR, AND

REPLACEMENT (TRUCK M756A2).

TOOLS:

No special tools required

SUPPLIES: Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680

Clean rags

PERSONNEL:

Two

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a.

Preliminary Procedures.

(1) Remove side racks and endgate. Refer to Operation of Cargo Trucks,

TM 9-2320-209-10.

(2) Remove rear splash guards. Refer toTM 9-2320-209-20.

(3) Unplug taillights and stoplights and take off right rear blackout light

mounting bracket. Refer to Taillight and Stoplight Assembly (right side only)

Removal and Replacement (Early Model Trucks with Turn Signals) TM 9-2320-209-20.

(4) Remove tailboard roller. Refer to Tailboard Roller Assembly Removal,

Repair, and Replacement TM 9-2320-209-20.

(5) Remove auxiliary roller brackets. Refer to Auxiliary Roller Bracket

Assembly, Removal, Repair, and Replacement TM 9-2320-209-20.

(6) Remove stiff leg jacks. Refer to Stiff Leg Jack Assembly, Removal,

Repair, and Replacement TM 9-2320-209-20.

(7) Remove

TM 9-2320-209-20.

(8) Remove

(9) Remove

TM 9-2320-209-20.

A-frame gin poles and side clamp assemblies. Refer to

floorboards. Refer to para 17-62.

tool box.

Refer to Tool Box Removal and Replacement,

17-754