TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

TM-9-2320-209-34-2-3 - Page 102 of 592

TM 9-2320-209-34-2-3

FRAME 19

1.

Slide collar (1) off shaft (2).

2.

Hold shaft (2) at pin end. Pull shaft out of drum (3).

3.

Slide collar (4) and bushing (5) off shaft (2).

NOTE

Do not take out bearings (6 and 7) unless they are

damaged.

Refer to para 18-5e for inspection procedures.

4.

Take out bearings (6 and 7).

5.

Do not remove pin (8) from shaft (2), unless new drumshaft is being put in.

GO TO FRAME 20

18-91