TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

  TM-9-2320-209-34-2-3 - Page 108 of 592

TM 9-2320-209-34-2-3
FRAME 25
1.
Take off four capscrews (1) and washers (2) from bearing housing (3).
2.
Lift off bearing housing (3) with mating parts from worm housing (4).
3.
Take off gasket (5) from worm housing (4) and throw away gasket.
4.
Take off safety wire (6) from bearing retainer mounting screws (7).
5.
Take off capscrews (7) from retainer (8).
6.
Take apart bearing housing (3) from retainer (8).
7.
Check that roller bearing assembly (9) has no grooved, pitted or flattened
rollers.
If roller bearing assembly is damaged, take out roller bearing
assembly (9) and oil seal (10).
Refer to para 18-5e for inspection procedures.
8.
If oil seal (10) shows signs of leakage or is burned, take out oil seal. Be sure
not to damage bearing rollers.
Refer to para 18-5e for inspection procedures.
GO TO FRAME 26
18-97


Back to Top