TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

  TM-9-2320-209-34-2-3 - Page 117 of 592

TM 9-2320-209-34-2-3
FRAME 7
1.
2.
3.
4.
5.
6.
Check that gear (1) has no sharp fins or burrs at tooth corners. Smooth
out small damage with a honing stone. If gear is damaged in any other way,
get a new one.
Check that gear (1) is not cracked. If gear is cracked, get a new one.
Check that gear (1) is not chipped or has broken teeth. If any teeth are
damaged, get a new gear.
Check that clutch teeth on clutch and brake plate (2) are not worn or damaged.
Smooth out small damage to clutch teeth with a honing stone.
Check that bearings (3 through 6) are not pitted, burred, grooved or
rough.
Polish small damage with crocus cloth.
Check that bearings (3 through 6) are not cracked. If bearings are cracked,
get new ones.
GO TO FRAME 8
18-106


Back to Top