TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

  TM-9-2320-209-34-2-3 - Page 124 of 592

TM 9-2320-209-34-2-3
f.
Assembly.
FRAME 1
1.
If bearing (1) was taken out, pack new bearing with type GAA grease,
MIL-G-10924.
2.
Press bearing (1) into housing (2).
3.
Place retainer (3) on housing (2). Put on four capscrews (4).
4.
Tie capscrews (4) together with safety wire (5).
5.
If oil seal (6) was taken out, press new seal into housing (2). Be sure
that seal lip faces inside of bearing housing.
6.
Place nut (7) on pin (8).
7.
Put pin (8) onto housing (2) and tighten with nut (7).
GO TO FRAME 2
18-113


Back to Top