TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

  TM-9-2320-209-34-2-3 - Page 129 of 592

TM 9-2320-209-34-2-3
FRAME 6
1.
2.
3.
4.
5.
GO
Put new gasket (1) and bearing retainer (2) on bearing housing (3).
Put two capscrews (4) on the lower part of bearing housing (3) and bearing
retainer (2).
NOTE
The upper capscrews are put in during installation of
cable level winder assembly.
Tie capscrews (4) together with safety wire (5).
Put spacer (6) on wormshaft (7) up against outer bearing assembly (8).
Be sure that oil seal (9) is properly seated around spacer (6).
TO FRAME 7
18-118


Back to Top