TM 9-2320-209-34-2-3
FRAME 4
1.
Put plugs (1) on housing (2).
2.
Put new gasket (3) on housing (2).
3.
Put worm roller bearing housing (4) in housing (2).
4.
Put on four capscrews (5) and washers (6).
5.
Put worm assembly (7) in housing (2) with sprocket end facing out.
Guide brake step end of wormshaft through bearing housing (4).
6.
Put bearing housing (8) and new gasket (9) on housing (2).
GO TO FRAME 5
18-116