TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

TM-9-2320-209-34-2-3 - Page 123 of 592

TM 9-2320-209-34-2-3

FRAME 12

NOTE

Readings must be within limits given in table 18-11.

If readings are not within given limits, throw away

part and get a new one.

1.

Measure the outside diameter of automatic stop pin (1).

2.

Measure the thickness of automatic brake lining (2).

3.

Measure the thickness of automatic brake lining plate (3).

END OF TASK

Table 18-11. Rear Winch(Automatic Brake Assembly)Wear Limits

Index

Number

1

2

3

Item/Point of Measurement

Outside diameter of worm automatic

stop pin

Thickness of worm automatic brake

lining

Thickness of worm automatic brake

lining plate

Size and Fit

of New Parts

(inches)

0.436 to 0.437

0.125

0.094 to 0.125

Wear Limit

(inches)

0.431 to 0.432

0.084

0.084 to 0.45

18-112