TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

TM-9-2320-209-34-2-3 - Page 122 of 592

TM 9-2320-209-34-2-3

FRAME 11

1.

Check that oil seals (1 and 2) are pliable and show no signs of burning. If

any seal is not pliable or shows signs of burning, get new one.

2.

Check that feather edge of oil seals (1 and 2) is not damaged and is in

proper contact with turning parts.

3.

If there was oil leakage before disassembly, put in new oil seals (1 and 2).

4.

Check spacer (3) and worm brake (4) for grooving caused by damaged oil

seals (1 or 2).

If spacer and worm brake are grooved, get new ones.

GO TO FRAME 12

18-111