TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

  TM-9-2320-209-34-2-3 - Page 138 of 592

TM 9-2320-209-34-2-3
FRAME 15
1.
2.
3.
4.
5.
6.
Turn sleeve (1) until untapped hole in sleeve is alined with small hole in
brake plate (2). Push sleeve toward brake plate and put one small ball
(3) into untapped hole.
Turn sleeve (1) one-half turn until untapped hole is alined with other hole
in brake plate (2).
Push sleeve (1) toward brake plate (2). Put in small ball (3), detent (4),
spring (5), other detent (4), and other small ball (3).
Slide sleeve (1) against stopring (6). Turn sleeve until untapped hole in
sleeve is alined with large hole in brake plate (2). Put one large ball (7)
into untapped hole.
Turn sleeve (1) until tapped hole is alined with small hole in brake plate (2).
Put other large ball (7) into untapped hole.
Put in pipe plug (8) and dog-point capscrew (9).
GO TO FRAME 16
18-127


Back to Top