TM-9-2320-209-34-2-3
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3
MAY 1981
TM-9-2320-209-34-2-3 - Page 142 of 592
TM 9-2320-209-34-2-3
FRAME 19
1.
2.
3.
4.
5.
6.
7.
8.
9.
Lift and hold up winch shaft and drum assembly (1), using a hoist.
Put drumshaft support (2) in place.
Lower shaft and drum assembly (1) on drumshaft support (2) and worm hous-
ing (3). At the same time, mesh drive gear with worm in worm housing (3).
Check that bushings are properly seated in worm housing (3).
Put
Put
Put
Put
Put
in two bushing reducers and air valve (4).
in two pins (5).
on two worm housing gaskets (6).
cover (7) on worm housing (3).
in three washers (8) and screws (9).
GO TO FRAME 20
18-131
Back to Top
